• Fischer 53578 FIPPI S Intumescent Putty Pad 170mm X 170mm Internal App

    Fischer 53578 FIPPI S Intumescent Putty Pad 170mm X 170mm Internal App

    £6.48 Incl. VAT

    fischer Intumescent Putty Pads FiPP are manufactured from a red, non-setting, silicone based intumescent polymer and tested in accordance with BS EN 1366-3 for up to 2 hour fire rating and 2 hour insulation. Available as internal and external version, the FiPP is also available in different sizes to suit different socket versions.- Simple and quick installation.- Excellent acoustic properties.- No electrical conductivity.- Primerless adhesion to most substrates.- Robust detail part E handbook accepted- Available as internal and external version, the FiPP is also available in different sizes to suit different socket versions

    Add to cartDone
  • Fischer 54757 FIPPI D Intumescent Putty Pad 230mm X 170mm Internal App

    Fischer 54757 FIPPI D Intumescent Putty Pad 230mm X 170mm Internal App

    £7.26 Incl. VAT

    fischer Intumescent Putty Pads FiPP are manufactured from a red, non-setting, silicone based intumescent polymer and tested in accordance with BS EN 1366-3 for up to 2 hour fire rating and 2 hour insulation. Available as internal and external version, the FiPP is also available in different sizes to suit different socket versions.- Simple and quick installation.- Excellent acoustic properties.- No electrical conductivity.- Primerless adhesion to most substrates.- Excellent acoustic properties- Air permeability

    Add to cartDone
  • Eaton FXROLPWR LX Wall Base and Sounder Red

    Eaton FXROLPWR LX Wall Base and Sounder Red

    £88.73 Incl. VAT

    Ideal for dual use applications where a visual alarm device is required in addition to an audible alarm. The RoLP LX is a reliable, high performing VAD (visual alarm device) that is certified to EN 54-23.- Ultra low current consumption- Up to 7.5m coverage volume (switchable to 2.5m)- 0.5 or 1Hz flash rate- Use where current consumption is a key consideration- Delivering up to 106dB(A) at 1 metre sound output- Ideal for bedrooms, bathrooms and toilets- Switch flash rate to 0.5Hz

    Read moreDone
  • Eaton FXSOLWRD Solista LX Wall Body Deep Base Red

    Eaton FXSOLWRD Solista LX Wall Body Deep Base Red

    £67.54 Incl. VAT

    A patented lens design that distributes light to achieve the required illumination specified by EN54-23, while using the minimum current consumption. Designed for installation at a height of up to 3m and with a discrete, compact appearance, the device is ideal for a variety of applications including bedrooms, bathrooms and toilets.- Ultra low current consumption of 10mA- Up to 7.5m coverage volume- 0.5Hz or 1Hz flash rate- Coverage switch to 2.5m on the wall variant- Use where current consumption is a key consideration- Reduces power consumption by up to 50%- Switch flash rate to 0.5Hz

    Add to cartDone
  • Card Cfp/Xfp Network Driver

    Card Cfp/Xfp Network Driver

    £83.39 Incl. VAT

    CFP/XFP network communications card for XFP 16 zone panels- Allows the connection of up to eight CFP760 Repeaters- Communicates over screened two-wire fire resistant cable- Total repeater network cable length should not exceed 1KM- CE Approval- Mounts inside a CFP Standard or CFP AlarmSense Fire Panel- Power requirements Aux 24V from host fire panel.

    Add to cartDone
  • Spare Break Glass For Call Point Branded 77mm x 50mm x 18mm

    Spare Break Glass For Call Point Branded 77mm x 50mm x 18mm

    £18.41 Incl. VAT

    Manual Call Point Spare Break Glass (Pack of 5)- Height: 50mm- Length: 77mm- Weight: 200g- Depth: 18mm- Exact replacement for broken call point glass- Easy installation

    Add to cartDone
  • Apollo Manual Callpoint Red Isolator for XP95

    Apollo Manual Callpoint Red Isolator for XP95

    £54.78 Incl. VAT

    A seven-segment DIL switch enables the addressing of each call point at commissioning stage. When operated, the manual call point interrupts the polling cycle for a fast response. XP95 products are frequently used in commercial, industrial, financial, government, IT/telecoms and healthcare applications.- Bi-coloured LEDs indicate isolate and normal conditions- The red LED is lit when the call point has been activated- An amber/yellow LED indicates a fault- Suitable for medium-to-large applications- EN 54-11 & EN 54-17 Certified- Reports an alarm in under 0.2 seconds

    Add to cartDone
  • Eaton EF009SB BiWire 3 Tone Ultra Wall Sounder VAD

    Eaton EF009SB BiWire 3 Tone Ultra Wall Sounder VAD

    £77.33 Incl. VAT

    The BiWire range has been designed to meet the European standards for EN54-3 for the sounder and EN54-23 for the beacon VAD.- Certified for fire use- Ideal for high noise environments- Suitable for open areas, as well as outdoor use- Easy to maintain and service- High sound output and durable design- Certified to EN54-3 and EN54-23- ABS FR plastic material- Environmental category: IP21C

    Add to cartDone
  • Apollo Multisensor Detector for Discovery

    Apollo Multisensor Detector for Discovery

    £51.40 Incl. VAT

    A multi-sensor detector that comprises of optical smoke and thermistor temperature sensors which give both a combined signal as well as a separate heat signal for improved false alarm management. It is suitable for bedrooms, hospitals, hotels, medium to large buildings, offices, university campuses, car parks/loading bays, clean rooms, warehouses.- 5 response modes- Remote test feature- Ideal for a wide range of applications- Enhanced false alarm management- Unaffected by wind or atmospheric pressure- Heat only and optical only options- Well-suited to sensitive environments- Recommended, in specific modes, for hotel bedrooms and hospital wards

    Add to cartDone