Photo-Electric Sensor Xub Polarised Sn 2M 12-24Vdcm12
£95.22 Incl. VAT
This design 18 single mode (polarised reflex system) photo-electric sensor has a nickel plated brass case. It has a supply voltage of 12V to 24V DC. This mono-mode cylindrical photoelectric sensor has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor. 1 LED display allows to identify status of the sensor. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified. · · · This design 18 single mode (polarised reflex system) photo-electric sensor has a nickel plated brass case. · · It has a supply voltage of 12V to 24V DC. · · This mono-mode cylindrical photoelectric sensor has a metallic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. · · Corrosion-resistant and non-magnetic nickel plated brass provides high robustness to the sensor. · · 1 LED display allows to identify status of the sensor. · · Sensor Style: Cylindrical M18
Out of stock
Description
Technical Specifications Technical Specifications Retroreflective photoelectric sensor Explosion safety category for gas None Material of optical surface Plastic Laser protection class None Explosion safety category for dust None Construction type housing Cylinder, screw-thread Type of light Polarized red light Sensing mode Dark switching Type of electric connection Connector M12 Housing material Metal Operation agent-safety class Safety class 0 Light dot – mm² Degree of protection (IP rating) IP65 Voltage type AC/DC Type of safety acc. IEC 61496-1 1 Type of switching output PNP/PNP Type of switch function Normally open contact (NO) Reaction time 1 ms Min. reflector distance 1000 mm Max. output current at protected output 100 mA Width sensor – mm Height of sensor – mm Number of protected semiconductor outputs 0 Number of contact energized outputs with signalling function 0 Transmission range of the safety field – m Length of sensor 60 mm Max. switching distance 3000 mm Rated switching distance 2000 mm Maximum output current 100 mA Number of semiconductor outputs with signalling function 1 Number of protected contact energized outputs 0 Switching frequency 500 Hz Switching voltage of OSSD at state “high” – V Wavelength of the sensor – nm Diameter sensor 18 mm Ambient temperature -25 – 55 °C Rated control supply voltage at AC 50 Hz – V Rated control supply voltage at AC 60 Hz – V Rated control supply voltage at DC 12 – 24 V With communication interface Ethernet No With communication interface INTERBUS No With communication interface RS-232 No With communication interface RS-485 No With communication interface SSI No With communication interface SSD No With communication interface RS-422 No With restart blockage No Analogue output 0 V … 10 V No Analogue output 4 mA … 20 mA No Analogue output 0 mA … 20 mA No With communication interface DeviceNet No With communication interface CANOpen No With communication interface AS-Interface No With communication interface analogue No With communication interface PROFIBUS No With other analogue output No Analogue output -10 V … +10 V No With time function No Reflector included No Pre failure notice No With monitoring function downstream switching devices No Suitable for safety functions No · Technical Data Sheet – Click to Download · Manual: https://asset.eezybridge.com/ad7e7626-8f4a-4edb-b78d-9ca040e321dd/2188162
