Telemecanique Sensors Photo-electric sensor, XUB, diffuse, Sn 0,1m, 12..24VDC, M12
£84.66 Incl. VAT
This design 18 single mode (diffuse system) photo-electric sensor has a PBT case. It has a supply voltage of 12V to 24V DC. This mono-mode cylindrical photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability. 1 LED display allows to identify status of the sensor. IP65, IP67 and IP69K protection makes this product ready for the harshest environments. It can operate in very cold (-25°C) and hot environments (+55°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It provides double insulation for better people and system protection from electrical shocks. It is CSA and UL certified. · · · This design 18 single mode (diffuse system) photo-electric sensor has a PBT case. · · It has a supply voltage of 12V to 24V DC. · · This mono-mode cylindrical photoelectric sensor has a plastic body, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. · · It has VALOX® PBT high strength case ideal for high temperature environments and PMMA scratch-resistant lens for maximum sensor durability. · · 1 LED display allows to identify status of the sensor.
Description
Technical Specifications Technical Specifications Diffuse reflective photoelectric sensor Explosion safety category for dust None Explosion safety category for gas None Laser protection class None Material of optical surface Plastic Housing material Plastic Construction type housing Cylinder, screw-thread Sensing mode Dark switching Type of light Infrared light Type of switching output PNP/PNP Type of electric connection Connector M12 Type of safety acc. IEC 61496-1 1 Operation agent-safety class Safety class 0 Type of switch function Normally open contact (NO) Degree of protection (IP rating) IP65 Voltage type AC/DC Number of semiconductor outputs with signalling function 1 Number of protected semiconductor outputs 1 Number of contact energized outputs with signalling function 0 Min. reflector distance 0.3 mm Number of protected contact energized outputs 0 Switching frequency 500 Hz Light dot – mm² Maximum output current 100 mA Transmission range of the safety field 3 m Length of sensor 60 mm AWG-number – Max. switching distance 150 mm Diameter sensor 18 mm Width sensor – mm Max. output current at protected output 100 mA Height of sensor – mm Reaction time 1 ms Switching voltage of OSSD at state “high” – V Wavelength of the sensor – nm Ambient temperature -25 – 55 °C Rated control supply voltage at AC 50 Hz – V Rated control supply voltage at AC 60 Hz – V Rated control supply voltage at DC 12 – 24 V Operating distance 100 – 100 mm With time function No With monitoring function downstream switching devices No Pre failure notice No With restart blockage No Analogue output 0 V … 10 V No Analogue output 0 mA … 20 mA No Suitable for safety functions No Analogue output 4 mA … 20 mA No Analogue output -10 V … +10 V No With other analogue output No With communication interface Ethernet No With communication interface INTERBUS No With communication interface PROFIBUS No With communication interface analogue No With communication interface AS-Interface No With communication interface CANOpen No With communication interface DeviceNet No With communication interface RS-232 No With communication interface RS-485 No With communication interface RS-422 No With communication interface SSI No With communication interface SSD No · Technical Data Sheet – Click to Download · Manual: https://asset.eezybridge.com/ad7e7626-8f4a-4edb-b78d-9ca040e321dd/2188162