YIXINTAI Full protocol cell phone fast charger module QC4.0pd3.0 flash charger SCPFCP fast charger motherboard Pack of 5

Description

This model is divided into two models, 3516 and 3518, the difference is that 3516 does not support OnePlus’s VOOC fast charging and OPPO’s DASH fast charging, while 3518 does Product Introduction This product is small in size (50*17*12mm), suitable for users DIY! A good helper for outdoor/vehicle/power outages and other occasions! This is something that mobile phone chargers and power banks can’t do! 1. Wide supply voltage: 6 to 35V (the input voltage should be greater than the output voltage you need) 2. High-performance input anti-reverse connection: a special MOS tube to do anti-reverse connection, although the cost is high, but the effect is far more than the diode, not hot! Novice DIY does not have to worry about burning out!3. Equipped with fast charging status indicator: blue light is output indication, red light is fast charging status indication! Product features Fast charging protocol compatible: Support USB PD3.0 (PPS) support Qualcomm QC4+/QC3.0 support Huawei SCP/FCP support Apple 2.4A support Samsung AFC support VIVO 9V2A DUAL ENGINE SUPPORT MediaTek PE2.0 support OPPO VOOC support (3518 only) OnePlus DASH support (3518 only) External MOS tube, double wire and winding iron-silicon-aluminum magnetic ring are adopted, which has high efficiency and lower heat generation under the same charging power!! Double parallel low-resistance electrolytic capacitors + 6pcs 1206 ceramic capacitors! Just for higher performance Precautions 1. For low-voltage and high-current fast charging, please use the original data cable, if you want to measure the charging voltage and current, you must use a low-internal resistance USB meter! Otherwise, the charging current will be affected! 2. The TYPE C port is used for output charging; Cooperate with C-TO-C/TYPEC male-to-male dual-ended data cable to charge mobile phones or laptops!3. OPPO and OnePlus mobile phones need to use USB ports to charge! (3518 variety) QC4+/QC4.0/PD3.0 and other protocols must use TYPE C port!4, when the power supply voltage is higher than 21 volts, the C port PD protocol supports up to 20V3A output, the module is small in size, please ventilate well when used for notebooks with PD charging! 5. When the USB port and the TYPE C port are plugged into the mobile phone at the same time, both ports are 5V output! Use the test USB port: 1. Charge Huawei Mate20 (56% battery): Turn on SCP fast charging mode, with a voltage of 4.89V and a current of 4.59A 2. Charge Huawei P20Pro (12% battery): Turn on SCP fast charging mode with a voltage of 5.03V and a current of 4.25A 3. Charge Honor V20 (43% battery): Turn on SCP fast charging mode with a voltage of 5.13V and a current of 4.5A 4. Charge Xiaomi Mi 8 (18% battery): Turn on OC3.0 fast charging mode with a voltage of 6.44V and a current of 2.79A 5. Charge iPhoneXS (5% battery): turn on APPLE2.4A mode, voltage 5.22V, current 2.37A : Turn on VOOC flash charging mode 6.Charge OPPO R17 (power 43%) voltage 4.8V, current 3.8A (3518 models only) : Turn on DASH flash charging mode 7, charge OnePlus 6T (15% battery) with a voltage of 4.7V and a current of 3.8A (3518 models only) Type_C port: 1. Charge iPhone XR (7% battery): Turn on PD The voltage is 9.17V, and the current is 1.91A 2. Charge iPhoneX (7% battery): Turn on PD The voltage is 9.17V, and the current is 1.6A 3. Charge Huawei Mate20Pro (55%): Turn on PD The voltage is 9.20V, and the current is 1.58A 4. Charge Huawei P20Pro (10% battery): Turn on PD The voltage is 9.17V, and the current is 1.69A 5. Charge Honor V20 (40% battery): Turn on PD The voltage is 9.05V, and the current is 1.7A 6. Charge Xiaomi Mi 8 (6% battery): Turn on fast charging The voltage is 6.1V, and the current is 2.63A Brand: YixinTai Package: Standard Condition : 100% Original Category: Electronic component 00:50

.