Schneider Electric TeSys LC1D.K capacitor duty contactor, 3p, 60 kVAR, 415 V, 240 V AC co

TeSys LC1D.K capacitor duty contactor, 3p, 60 kVAR, 415 V, 240 V AC coil. range: TeSys – product name: TeSys LC1D.K – product or component type: capacitor duty contactor – device short name: LC1DWK – contactor application: power factor correction – utilisation category: AC-6B – poles description: 3P – device location in system: inside delta interruption, line interruption – reactive power rating: 104 kvar at 660…690 V AC 50/60 Hz <= 60 °C, 35 kvar at 230 V AC 50/60 Hz <= 60 °C, 63 kvar at 400…415 V AC 50/60 Hz <= 60 °C, 67 kvar at 440 V AC 50/60 Hz <= 60 °C – auxiliary contact composition: 1 NO + 2 NC for signalling circuit, 3 NO early make for power circuit – electrical durability: 200000 cycles at Ue 690 V, 300000 cycles at Ue 400 V – mounting support: DIN rail, plate – standards: CSA C22.2 No 60947-4-1, IEC 60947-4-1, UL 60947-4-1 – product certifications: CCC, CSA, EAC, IEC, KC, UL – connections – terminals: control circuit : screw clamp terminals 1 cable(s) 1…2.5 mm² – cable stiffness: flexible – with cable end, control circuit : screw clamp terminals 1 cable(s) 1…4 mm² – cable stiffness: flexible – without cable end, control circuit : screw clamp terminals 1 cable(s) 1…4 mm² – cable stiffness: solid – without cable end, control circuit : screw clamp terminals 2 cable(s) 1…2.5 mm² – cable stiffness: flexible – with cable end, control circuit : screw clamp terminals 2 cable(s) 1…4 mm² – cable stiffness: flexible – without cable end, control circuit : screw clamp terminals 2 cable(s) 1…4 mm² – cable stiffness: solid – without cable end, power circuit : EverLink BTR screw connectors 1 cable(s) 4…50 mm² – cable stiffness: flexible – with or without cable end, power circuit : EverLink BTR screw connectors 1 cable(s) 4…50 mm² – cable stiffness: solid – without cable end, power circuit : EverLink BTR screw connectors 2 cable(s) 4…16 mm² – cable stiffness: flexible – with cable end, power circuit : EverLink BTR screw connectors 2 cable(s) 4…25 mm² – cable stiffness: flexible – without cable end, power circuit : EverLink BTR screw connectors 2 cable(s) 4…25 mm² – cable stiffness: solid – without cable end – tightening torque: control circuit : 1.7 N.m – on screw clamp terminals, power circuit : 9 N.m – on EverLink BTR screw connectors. · · · TeSys D contactor, 3 poles (3NO), for switching 3-phase capacitor banks up to 63kVAR@400V 50Hz (104kVAR@690V). · · It provides a 240V 50/60 Hz AC coil, 1NO+2NC instantaneous auxiliary contacts, with front mounted early make poles and pre-wired damping resistors for current limitation. · · For operating rates until 240 cycles/hour and environments until 60°C, it procures high reliability and durability. · · Compact (85mm width), DIN-rail mounting or screw fixing.