Texa Filter IP54 250 x 250 x 30mm for Fan

WIDE RANGE OF AIR FLOW RATES Air flow rates range from 36 to 920 m/h. The standard air flow direction is from the exterior to the interior of the cabinet for all ventilation units. The user can easily invert this by simply removing and reinstalling the fan in the reverse direction. REDUCED EXTERNAL SIZE The external projection is just 5 mm, in order to eliminate operational problems during transport and use of the cabinet due to excessive external dimensions. REFINED DESIGN As well as the attractive design of the grille, the minimal external protrusion ensures a positive aesthetic impact which supplements and improves the look of the cabinet. The grille and fan support system are made of extremely tough, self extinguishing impact-resistant ABS, which meets UL94 V0 requirements. The standard colour is RAL 7035. On request, non-standard colours are possible for orders of sufficient quantities. QUICK INSTALLATION Installation is made extremely fast by the simplicity of the square cut to be made on the cabinet panel and by the snap fastening system which does not require fastening screws. The snap fastening system can be used on panels between 1.2 mm and 2.4 mm thick, which is virtually all. For thicknesses outside these limits, fastening can still be performed using the pack of screws included in all packs for this eventuality. HIGH RELIABILITY The fans used all feature motor shafts with bearings. High quality and with high volumetric efficiency, they have an expected lifetime of 30,000 hours at an ambient temperature of 55 C. They all feature provision for making easy and safe electrical connections. OPTIMISED PROTECTION OF THE CABINET The special configuration of the watertight grille, the self-adhesive seal for coupling to the enclosure and the EU4 filter allow FAN units to achieve an IP54 rating. IP55 rated ingress protection can be achieved with optional accessories. SUPPLY VOLTAGE The FAN units are available for the most common supply voltages: 230V single phase, 115V single phase and 400V two phase, all 50-60Hz dual frequency; also available in 24V DC and 48V DC versions up to 230 m/h. On request, versions for voltages not present in the catalogue can be produced for orders of sufficient quantities. FILTER UNIT FAN units can be used together with FIL filter meshes for expulsion of the air from the cabinet. Available in three sizes and created as the external part of the FAN unit, they allow the hot air to be expelled from the cabinet while maintaining its ingress protection rating. · · · Dimension HxWxD 250x250x26mm · · Temperatures limits -30 +75 · · Protection level IP44 · · Filter EU3 · · Conformity CE