Apollo XP95 Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any Discovery or XP95 system. The multi-tone open-area alarm device is powered directly from the loop and need no external power supply. It operates at 18 to 28VDC and is polarity sensitive. Synchronisation of the tones ensures the integrity of the signal – tones from different sounders do not merge into one signal that could be mistaken for a different tone. A nominal sound output of 100dBA is achieved at a current consumption of 5mA in the case of the sounder and 9mA for the sounder beacon. Many control panels will be able to drive up to 20 sounders per loop on average. The device will operates only with control equipment using the Apollo XP95 or Discovery protocol. The features of the multi-tone open-rea alarm device is available only when the sounder is connected to a control panel with the appropriate software. The multi-tone open-area sounder is designed for use in open areas and can be connected to any Discovery or XP95 system. · · · Updated to include choice of tones: Apollo, slow whoop and DIN · · Synchronisation of tones · · Individual and group addressing · · Loop powered · · IP21C Degree of protection · · Power-up surge current 1.2mA

A white circular plastic housing body designed to act as a locking base for XP95 fire detectors. · · · Locking Cap · · White · · XP95 Range · · For use with the flowing intelligent sounder bases: · · 45681-702 / 45681-393 / 45681-330 / 45681-332 / 45681-333 / 45681-276 / 45681-277 / 45681-290 / 45681-300 · · Sleek and stylish white design to complement any décor

Apollo 55000-193APO AlarmSense CS Heat Detector / Alarm , Apollo AlarmSense CS Heat Detector is designed to suit a wide variety of operating conditions. It is made of polycarbonate and available in white. A static heat detector (CS) which responds only when a fixed temperature has been reached and a rate-of-rise detector (A1R) which has a fixed upper limit · · · but in addition · · measures the rate of increase in temperature. AlarmSense is a range of conventional fire detection and alarm products designed to be connected to the same pair of supply wires · · making installation quicker and less expensive. AlarmSense has been developed to make the design and installation of a fire detection and alarm system easier and more economic for small to medium-sized buildings. The range also allows an existing system t · · AlarmSense incorporates features that help reduce false alarms and patented technology to ensure the integrity of a system. The range also includes products · · such as beacons · · to help meet the requirements of the Disability Discrimination Act (DDA). · · Can be used for applications where smoke detectors are unsuitable · · Ideal environments that are dirty or smoky under normal conditions · · CS detectors are ideal for use in environments with rapid temperature fluctuations · · 360C visibility of LEDs

Apollo 55000-190APO AlarmSense A1R Heat Alarm / Detector, There are two heat detectors in the AlarmSense range designed to suit a wide variety of operating conditions. A static heat detector (CS) which responds only when a fixed temperature has been reached and a rate-of-rise detector (A1R) which has a fixed upper limit, but in addition, measures the rate of increase in temperature. · · · Can be used for applications where smoke detectors are unsuitable · · Ideal environments that are dirty or smoky under normal conditions · · CS detectors are ideal for use in environments with rapid temperature fluctuations such as boiler rooms · · 360C visibility of LEDs · · Reduction of false alarms · · Quick and simple installation compliant with BS 5839 · · Applications B&Bs/guest houses Care homes Dusty environments HMOs Small to medium buildings University campuses · · Sends a cancel signal to stop all other alarms sounding · · compliant with BS 5839 · · Applications B&Bs/guest houses Care homes Dusty environments HMOs Small to medium buildings University campuses