Commercial Fire Alarm Systems

  • XFP Network Driver Card

    XFP Network Driver Card

    £125.35 Incl. VAT

    One AFP711 card required per networked Main XFP 1/2 Loop 32 Zone panel (note that XFP510-16 and XFP510-32 repeaters include a network driver card as standard).- This is NOT compatible with XFP Single Loop 16 Zone panels which require a CFP761 card for networking.- The network supports the programming of site data into remote panels from a PC at a local panel.- Up to 500m of cable may be fitted to an XFP two-wire repeater network.- Up to 500m of cable may be fitted to an XFP two-wire repeater network.- An optional system expansion device for use with XFP 1/2 Loop 32 Zone fire panels- Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix) on an RS485 network

    Add to cartDone
  • Securefast AEBBOX Surface Back Box For AEB2 / AEB6

    Securefast AEBBOX Surface Back Box For AEB2 / AEB6

    £7.60 Incl. VAT

    Securefast Surface Mount Box with stainless steel finish. It is suitable for AEB2, AEB5, AEB6 & AEB-KS range.- Aluminium single gang back box- For surface mounting exit buttons- Finish Stainless Steel- Dimensions H85 x W85 x D30mm- Internal use- Wear resistant legend

    Add to cartDone
  • Apollo XP95 Sounder Beacon Base With Isolator

    Apollo XP95 Sounder Beacon Base With Isolator

    £57.34 Incl. VAT

    – Two volume ranges 55-75dB(A) and 75-91dB(A)- Visual indicator flash rate of once per second- Synchronisation of ‘alert’ and ‘evacuate’ tones- Synchronisation of visual indicator flash- Individual and group addressing- Unique acoustic and visual indicator self-test- Built-in Isolator

    Add to cartDone
  • Intelligent Input/Output Unit Backbox

    Intelligent Input/Output Unit Backbox

    £60.66 Incl. VAT

    Apollo Intelligent Input/Output Unit provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts. The Intelligent Input/Output unit is available in the new faceplate style enclosure. This can be mounted with the supplied back-box for surface mounting or flush mounted using a UK double gang, flush mounting back-box of minimum depth 30mm. Compatible with XP95, Discovery and core protocol digital communication protocols. The Intelligent Input/Output unit complies with the essential requirements of the EMC Directive 2014/30/EU, provided that it is used as described.- Improved design for ease of wiring meaning faster installation- Contains controllable isolator- Address range 1 to 254- Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systems- Failsafe mode (meets BS 7273-4 requirements)- Ergonomic design for ease of wiring and faster installation

    Add to cartDone
  • Dorgard DG2000-BLK Wireless Fire Door Retainer Black

    Dorgard DG2000-BLK Wireless Fire Door Retainer Black

    £168.00 Incl. VAT

    Dorgard wireless fire door retainer- Wireless- Meets alll regulatory requirement- Hold opens fire doors- Closes on sound of alarm- Installed easily in under 5 minutes- ABS plastic casing- Powered by 2 x 1.5V C size batteries

    Add to cartDone
  • Fire Alarm Panel xfp 1 Loop 32 Zone XP95/Discovery

    Fire Alarm Panel xfp 1 Loop 32 Zone XP95/Discovery

    £635.90 Incl. VAT

    XFP 1 loop 32 zone panel, XP95/Discovery protocol.Max. 2 x 7Ah batteries- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB)- Compatibility with Apollo’s XP95/Discovery protocol- Two independently programmable conventional sounder circuits- Two programmable inputs- A fault output relay and three programmable relay outputs with voltage free changeover contacts- A selection of zone dependency/coincidence functions

    Add to cartDone
  • Eaton FX006 93-95dBA Internal Conventional Bell 24VDC 25mA 152 x 63mm Red

    Eaton FX006 93-95dBA Internal Conventional Bell 24VDC 25mA 152 x 63mm Red

    £28.40 Incl. VAT

    This conventional bell incorporates highly efficient, rotary centrifugal movements, combining high sound output with low current consumption. Bells still remain a popular choice for many applications such as schools, where they can sometimes be used as a signal for non-fire purposes, such as class change in education.- High sound output- Low current consumption- Multi-fixing base plate- Quick and simple to install- Can be used for non-fire applications- Easy to maintain and service- Compatible with the Eaton range of conventional fire systems

    Add to cartDone
  • Apollo Integrated Base Sounder With Isolator

    Apollo Integrated Base Sounder With Isolator

    £35.71 Incl. VAT

    – Two tones- Two volume ranges 55-75dB(A) and 75-91dB(A)- Individual and group addressing- Unique acoustic self-test- Built-in isolator- Housing Material is Polycarbonate

    Add to cartDone
  • Eaton FXN824 Sounder Base For FXN922

    Eaton FXN824 Sounder Base For FXN922

    £47.99 Incl. VAT

    FXN824 is a Base Mountable Sounder, suitable for FXN922 fire alarm systems.

    Add to cartDone