HVR Enclosure Heater 60W 230V AC 70mm x 121mm x 67mm

The power rating required to prevent condensation in a given cubicle depends upon a number of factors, including ambient temperature and relative humidity. However, as a general guide, 10 Watts per square metre of cubicle surface area may be used. Thermostats We recommend the use of a separate thermostat fitted within the cubicle but away from direct radiation from the heater. See the Thermostat Data Sheet. Mounting To ensure best results, the heaters should be mounted on the back plate of the enclosure with the resistor horizontal and the terminals at the bottom. This will ensure a free flow of air over the heater. If it is not possible to mount the heater in this way, or if the air flow is severely restricted, it may be necessary to use heat restricting cable to connect the heaters. · · · 60 watts · · Voltage 230