Stego Heater Anticondensatinion 10W 250V

The heat source in the element consists of a PTC element a semi-conductor that adapts its output to the ambient temperature. The PTC element has a high starting current and provides full output almost immediately. The current then falls quickly and the element is thereafter self-regulating, meaning that the warmer the surroundings, the less output produced by the element. Thanks to the chimney effect, meaning that the colder air is drawn into the element’s bottom and discharged at the top, good self-circulation is achieved for the heated air. The heating element is best installed in smaller cabinets so as avoid condensation or that the temperature falls beneath the minimum level. · · · Heat output 10W · · Nominal Voltage 120-240 V AC/DC · · Connection type 3 x AWG 20 (0.5 mm), 12 length · · Mounting type Din rail, clip for 35mm DIN rail, EN 60715 · · Operating/storage temp -45 to +70C (-49 to +158F) · · Operating/humidity temp max. 90% RH (non-condensing) · · Cable length 300m · · IP44