Fire, Security & CCTV, Commercial Fire Alarm Systems, Biwire

  • Eaton EF009SB BiWire 3 Tone Ultra Wall Sounder VAD

    Eaton EF009SB BiWire 3 Tone Ultra Wall Sounder VAD

    £77.33 Incl. VAT

    The BiWire range has been designed to meet the European standards for EN54-3 for the sounder and EN54-23 for the beacon VAD.- Certified for fire use- Ideal for high noise environments- Suitable for open areas, as well as outdoor use- Easy to maintain and service- High sound output and durable design- Certified to EN54-3 and EN54-23- ABS FR plastic material- Environmental category: IP21C

    Add to cartDone
  • XFP Network Driver Card

    XFP Network Driver Card

    £125.35 Incl. VAT

    One AFP711 card required per networked Main XFP 1/2 Loop 32 Zone panel (note that XFP510-16 and XFP510-32 repeaters include a network driver card as standard).- This is NOT compatible with XFP Single Loop 16 Zone panels which require a CFP761 card for networking.- The network supports the programming of site data into remote panels from a PC at a local panel.- Up to 500m of cable may be fitted to an XFP two-wire repeater network.- Up to 500m of cable may be fitted to an XFP two-wire repeater network.- An optional system expansion device for use with XFP 1/2 Loop 32 Zone fire panels- Allows the connection of up to eight XFP Repeaters or eight XFP Main panels (any mix) on an RS485 network

    Add to cartDone
  • Fire Alarm Panel xfp 1 Loop 32 Zone XP95/Discovery

    Fire Alarm Panel xfp 1 Loop 32 Zone XP95/Discovery

    £635.90 Incl. VAT

    XFP 1 loop 32 zone panel, XP95/Discovery protocol.Max. 2 x 7Ah batteries- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB)- Compatibility with Apollo’s XP95/Discovery protocol- Two independently programmable conventional sounder circuits- Two programmable inputs- A fault output relay and three programmable relay outputs with voltage free changeover contacts- A selection of zone dependency/coincidence functions

    Add to cartDone
  • Fire Alarm Panel Cfp Alarmsense 2 Zone 2 Wire

    Fire Alarm Panel Cfp Alarmsense 2 Zone 2 Wire

    £213.80 Incl. VAT

    CFP AlarmSense 2 zone two-wire panel. Max 2 x 3.2Ah batteries- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB)- Integral 1.5A EN54-4/A2 compliant switch mode PSU- Intuitive user-friendly interface with colour-coded buttons and combined keypad/key switch entry- Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points- Four conventional sounder circuits- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones

    Add to cartDone
  • Keys for Twinflex Manual Call Point (Pack of 5)

    Keys for Twinflex Manual Call Point (Pack of 5)

    £4.14 Incl. VAT

    Keys for use with the Twinflex Manual Call Point.- 5 Keys- Suitable for FDW100- same reset key fits all Fike Twinflex manual call points- Light weight- Fits on keyring- Readily available

    Read moreDone
  • Securefast Remote Fire LED Indicator

    Securefast Remote Fire LED Indicator

    £12.40 Incl. VAT

    Securefast Remote Fire LED Indicator.- For use with Fike fire alarm systems- LED- Provides early warning of a fire- Bright, flashing LED signal- Gives you time to evacuate your home or business- For use with Fike fire alarm systems- Easily visible- Alerts you to a fire in your home or business

    Add to cartDone