Lamp Holders

  • Jeani JABCESW Lamp Adaptor BC To ES - White

    Jeani JABCESW Lamp Adaptor BC To ES – White

    £4.12 Incl. VAT

    Out of Stock

    Jeani JABCESW White BC to ES Lamp Adaptor A Lamp adaptor allows use of existing lighting fittings with lamps of a different cap type. For use with all lamp types such as tungsten, eco-halogen or LED. The Jeani JABCESW converts Existing BC B22 fittings to ES E27. Finish: White Finish Size: Large Bayonet (Male) to Large… · · · Size: Large Bayonet (Male) to Large Edison Screw (Female) · · Adaptor allows use of existing lighting fittings with lamps of a different cap type. For use with all lamp types such as tungsten, eco-halogen or LED · · Dual voltage shaver socket and safety isolating transformer: for bathroom use · · Permanent power to shaver socket: with a pull cord switch for isolated illumination · · Access cover to connection block: easy wiring from the front of the fitting · · 6.7W = 463 lumen output: low energy consumption and prolonged lamp life · · 3000k Colour temp ( Warm White ) · · IP44 Rated · · Can be used in Bathroom Zone 2

  • Jeani 501/100 Back Plate Brass 1/2-Inch (13mm)

    Jeani 501/100 Back Plate Brass 1/2-Inch (13mm)

    £1.78 Incl. VAT

    In Stock for Delivery

    Back plate made of brass · · · Brass Backplate · · 1/2″ · · Denmans Feature 3 · · Denmans Feature 4 · · Denmans Feature 5 · · Denmans Feature 6 · · Denmans Feature 7 · · Denmans Feature 8 · · Denmans Feature 9 · · Denmans Feature 10

  • Hager SEL96T BC Straight Batten Lamp Holder White/Blue

    Hager SEL96T BC Straight Batten Lamp Holder White/Blue

    £7.12 Incl. VAT

    Out of Stock

    BC Straight Batten Lamp Holder White/Blue · · · 2 terminal straight body · · 3 terminals and earth base · · Home office shield · · Complies with BS 7895 · · Heat resistance rating = T2 (210°C) · · Automatically disconnects power at the contacts when the lamp is removed · · 50.8mm fixing centres for non-access versions · · BC (Bayonet Cap) conventional lampholder

  • Jeani A40 ES-E27 Porcelain/Ceramic Lamp Holder

    Jeani A40 ES-E27 Porcelain/Ceramic Lamp Holder

    £3.54 Incl. VAT

    In Stock for Delivery

    ES-E27 Porcelain/Ceramic Lamp Holder · · · With screw terminals · · Replacement lampholder · · For Edison Screw (‘ES’) lamps

  • Steeple GU10LH GU10 Spare Lampholder

    Steeple GU10LH GU10 Spare Lampholder

    £3.74 Incl. VAT

    In Stock for Delivery

    GU10 spare lampholder · · · GU10, lampholder · · GU10 Lampholder · · Ceramic Construction

  • Steeple AWFO8 GU5.3 LV Spare Lampholder

    Steeple AWFO8 GU5.3 LV Spare Lampholder

    £4.08 Incl. VAT

    Out of Stock

    GU5.3 LV spare lampholder · · · GU5.3, low voltage, lampholder, mains · · Silicon braided cable: Heat resistant · · Ceramic Construction

  • Hager Pendant Set BC c/w Short Skirt Lampholder 150mm White

    Hager Pendant Set BC c/w Short Skirt Lampholder 150mm White

    £4.73 Incl. VAT

    In Stock for Delivery

    A safety pendent set with access ceiling rose and short skirt. · · · 3 x 1mm² terminal capacity · · Barriers between terminals · · Barriers between terminals

  • GET BS6007 Prewired Angle Batten Lamp Holder 80x51x90mm White (GABAT)

    GET BS6007 Prewired Angle Batten Lamp Holder 80x51x90mm White (GABAT)

    £5.92 Incl. VAT

    In Stock for Delivery

    Prewired Angled Batten Lamp Holder 80 x 51 x 90mm White · · · Clear terminals for easy visibility and installation · · Ample wiring space with four knockouts · · Large capacity earth terminal · · Pendant lamp holder has integral cord grip to prevent cable pull on terminals · · Batten lamp holders (straight and angled) are pre-wired · · Complies with BS EN 61184 · · IP20